top of page

Vinyl Siding Cost in Des Moines (2027 Pricing Guide)

Writer: Midwest Seamless Expert
Midwest Seamless Expert
Oct 7
3 min read

How Much Does Vinyl Siding Cost in Des Moines? (2026 Pricing Guide)

The short answer: For a typical Des Moines-area home with about 2,000 square feet of exterior wall area, planning ranges for vinyl siding replacement run roughly $10,000 to $26,000 installed, depending on the quality level you choose. Below, we break that into the good, better, best system we use at Midwest Seamless, so you can see where your project is likely to land in terms of vinyl siding cost.


These are general planning ranges, not quotes. Every home is different, and we build every estimate around your home's actual measurements and condition.


Good, Better, Best: How Our Siding Options Compare


Good

Better

Best

Product

Alside Odyssey Plus

Alside Charter Oak Energy Elite

Alside Ascend Composite Cladding

What it is

Durable, low-maintenance vinyl with a woodgrain look

Insulated vinyl with foam backing for added stiffness and comfort

Composite cladding with a premium, crisp finish

Typical installed cost per sq ft

$5 – $8

$7 – $12

$8 – $13

Typical total, 2,000 sq ft of siding

$10,000 – $16,000

$14,000 – $24,000

$16,000 – $26,000


Estimated Cost by Home Size

Siding area

Good

Better

Best

1,500 sq ft

$7,500 – $12,000

$10,500 – $18,000

$12,000 – $19,500

2,000 sq ft

$10,000 – $16,000

$14,000 – $24,000

$16,000 – $26,000

2,500 sq ft

$12,500 – $20,000

$17,500 – $30,000

$20,000 – $32,500

Siding area means the total wall surface being covered, not your home's floor area. Many homes need less or more than their floor plan suggests.


What Drives the Price

  • Size and complexity. Gables, corners, dormers, and lots of window and door cutouts add labor.

  • Tear-off and disposal. Removing old siding and hauling it away is often priced separately in cost guides, commonly in the range of $1,000 to $2,500.

  • Repairs. Rotted sheathing or water damage found under old siding adds to the project.

  • Trim, soffit, and fascia. Replacing these at the same time keeps the finished look consistent.

  • Labor. In most cost guides, labor accounts for roughly 40 to 60 percent of the total.

  • Product choice. Moving from good to better or best is the biggest single price lever, and it's a choice about performance, comfort, and look.


Is It Worth Moving Up a Tier?

  • Good is a strong value for homeowners who want a clean, low-maintenance exterior without paying for extras.

  • Better adds an insulating foam backing that makes panels stiffer and helps with comfort, and many homeowners choose it when they plan to stay in the home long term.

  • Best is for homeowners who want a premium look and the highest-end finish.

Not sure? We'll bring samples and let you compare them in person. And if you're considering texture accents like shakes or scallops, see our shakes and scallops page or our NextStone options.


What Should an Installed Quote Include?

Ask any contractor to list: removal and disposal, house wrap or underlayment, trim and corner pieces, flashing, and what happens if hidden damage is found. A clear written quote protects you from surprises.


Could Insurance Cover Part of It?

If your siding was damaged by hail or wind, an insurance claim may cover repairs or replacement. See our guide to when siding repair is covered by insurance.


Why Midwest Seamless

  • Family-owned since 1963, based in Bondurant and serving the Greater Des Moines area

  • Iowa Contractor License #C073382 and a BBB A+ rating

  • A simple good, better, best system, with no pressure and a clear written estimate


Get Your Real Number

The fastest way to know what your home will cost is a free, no-pressure estimate. Call (515) 285-8574 or request a free estimate, and we'll measure, walk you through your options, and give you a clear price.


Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page